alproof unload_offset uo Trendsetter_400/800_Proofing This is the offset (in mm) from the trailing edge of the media which we go to with the VR to pick the media up from the drum. It should not usually be changed from it's default value. int8

6 (prior to version 1.1) 8 (after version 1.1)

0 to 255 mm

cal

..\..\ShowAllErrors.htmFirmware 0 Error Index

..\..\ShowAllCommands.htmFirmware 0 Command Index

..\..\ShowAllNVS.htmFirmware 0 NVS Index

Updated: Wed Jul 16 19:36:27 2008 PST